BMW M6x v8 e30 and e36 conversion mounts (m60/s62)

Pre-Order BMW M6x v8 e30 and e36 conversion mounts (m60/s62)

BMW M6x v8 e30 and e36 conversion mounts

Its here! Our m6x motor swap conversions for your m60/m62 swap into your e30 or e36! These motor mounts allow you to put bmws M6X series v8 into your e30 or e36. That means the v8 from your e34 540i, e32 740i, e39 530,540 or m5. No hacking of the car is needed (completely reversible). E36 conversions will require custom oil pan. Subframe spacers come with every kit, however, they are actually optional in the conversion. The spacers will lower the subframe to the keep the driveline straighter and giving more underhood clearance for the bmw plastic covers as well as if you decide to use the e32/e34 radiator reservoir. We recommend using x5 headers in the e30 conversions. For more tips and the whole conversion writeup. Click here. 

If you want a more details on the m60/s62 swap. We fully endorse the MACALENT LLC swap guide. This guide is extremely detailed! It gets down into the details, part numbers, order of items and tons more! It goes into detail on the swap so that any shady-tree mechanic can do this swap in less than 1 month with $1000 investment (assuming they have the the car and drivetrain already acquired). This is the best investment you can do before starting the swap. Click here to buy the manual.

Please keep in mind the custom nature of these parts. Please allow about 2 week for delivery.  X5 or milled down oil housings are required. 

Features include:

- Incredibly strong: Cad designed and tested

- 1/4 plate construction

- Fully tig welded (certified)

- 10.9 grade subframe hardware

- Two mounting positions included

 

(We reserve the right to change design, look and specifications without notice)

M60 E30 motor mount conversion

M60 subframe spacers

Every e30 / e36 v8 kit includes:

M6x e30 or e36 motor mounts

Optional Subframe spacers (10.9 hardware included).

 

Options explained:

Boosterless brake setup:

The brake booster relocation is the hardest part of the v8 into e30 swap. The factory booster is in the way. Some choose to use e32/e34 booster setup and relocate behind the headlight. This is costly, requires lots of custom work, clusters engine bay, and requires the removal or relocation of the complete abs setup including brake lines. With this boosterless brake setup bracket, swap time is shorter, and swap is cleaner. Our boosterless brake bracket allows you to use wilwood or tilton pedals/master cylinders. Everything is relocated tightly and neatly under the dash in the factory pedal area. When the conversion is done, its all hidden! Simply mount the resevours in your engine bay and thats the only give away. We recommend using masters with 5/8" bore front and rear. These are the most compact masters and the smaller bore means that effort will be bearable. General rule of thumb: Bigger bores: Minimal pedal travel/stiffer pedal/higher pedal effort. Smaller bores: Long pedal travel/softer pedal/less pedal effort. All grade 8 hardware included. Pedals/master cylinders are not included and must be bought.

e30 boosterless brake setup

 

6 speed transmission extention brackets

When swapping in a bmw 6 speed transmission, the additional length of the transmission means you cannot use your factory transmission brace. You will need to "extend it". To do this, you need these precut trans bracket extension brackets. Simply weld them onto your factory brace and you 6 speed is mounted! Picture below shows concept of early model:

6 speed e30

6 speed e30

6 speed driveshaft:

We offer a complete brand new drive shaft for your 6 speed conversion. Everything from the transmission (behind the guibo) to the diff. Includes new center bearing and hardware. 

RPM module/coding plug:

Your factory RPM gauge will not be accurate, when you do the conversion.  Simply plug in our coding plug into your stock cluster and the RPM gauge will be accurate. Needed for any v8 swap in an e30.



If you want a more details on the m60/s62 swap. We fully endorse the MACALENT LLC swap guide. This guide is extremely detailed! It gets down into the details, part numbers, order of items and tons more! It goes into detail on the swap so that any shady-tree mechanic can do this swap in less than 1 month with $1000 investment (assuming they have the the car and drivetrain already acquired). This is the best investment you can do before starting the swap. Click here to buy the manual.

Disclaimer: Technical Information/Advice Use-At-Your-Own-Risk-Disclaimer: We offer all email, telephone, and posted technical information / advice on our site TO BE USED AT YOUR OWN RISK. We offer no guarantee that your interpretation or skill in implementing the information we provide will achieve your desired result.

Write a review

Please login or register to review
  • Brand: Garagistic
  • Product Code: m6x_motor_mount
  • Availability: Pre-Order
  • $225.00

Available Options


Garagistic Guarantee!
Found a better price? We'll beat it!

Tags: e30 m60 swap, e30 v8 swap, e30 m62 swap, bmw 340, e30 m60 motor mounts