Poly e30 rear subframe bushings - (Raised 80a)
Did you know we price match?
Polyurethane raised e30 rear subframe bushings (80a)
These are our raised 80A durometer poly rear subframe bushings for the e30. These are our "red" mounts. They are the harder poly bushing we make (we have a harder poly version as well as a harder delrin version). These e30 poly rear subframe bushings will reduce play in the suspension substantially compared to old and mushy bushings. Please note: If you use these with adjustable rear subframe conversions you will need to cut down bushing. If you would like us to do so for you, let us know (see pictures). These are the "raised height" bushings. That means that these e30 rear subframe bushings will actually raise up the subframe 12mm to compensate for unwanted rear camber. We have our "standard versions" of these as well. We highly recommend professional installation as these will require a press to install as well as remove your old bushings. Let us know if you would like these pressed into your subframe! These replace OEM part number 33311129144 (33-31-1-129-144)
The 12mm raised subframe bushings reduces camber by 4.0 - 4.5 degrees (better for a street application). Average change is from -5 degrees to -1.5 degrees (depends on suspension setup). The standard subframe bushing kit does not change camber (better for a track application).
These are great for dual purpose cars that see track days and drift application. They offer a good trade off between performance without the noise delrin/solid bushings add. They mount the rear e30 subframe to the chasis removing most flex from the suspension. The stock bushing "floats". This means that the subframe is meant to move. BMW does this for comfort. Its not a good thing when it comes to performance. These poly e30 rear subframe bushings will make the subframe not able to deflect and move in all kinds of unwanted directions. Pair these up with our poly rear trailing arm bushings to do the job right the first time! These are stiffer then the oem units which will cause some minor NVH. Includes everything needed for installation. Includes both bushings as well as aluminum sleeves. Fits BMW 3 Series E30 (318, 323, 325 & M3) DOES NOT FIT iX model).
Why should go to poly rear subframe bushings in my e30?
E30s are old. Those rear subframe bushings are tired. Chances are they have never been changed. You have lowered your car. But you may still notice that the rear of the e30 is constantly trying to kill you as you go around a turn. Well, thats the e30 rear subframe moving around causing the rear end of the car to become unstable and at times unpredictable. This is often paired with annoying clunking sounds and creaks. From a performance aspect having a loose subframe messes with your suspension's alignment and settings. The poly rear subframe bushings make for better suspension alignment and tighter feel. WILL increase roadnoise a little ina street car. Price for 1 pair of mounts (includes races).
Why use poly rear subframe bushings in my e30?
Well we will start by mentioning that the factory bushings we made of rubber (duh!). That means the bmw put them there because they are designed to flex and absorb energy making it a little comfy on the street and not allowing a sh** ton of noise to get in). Thats wonderful if your car is a street car, but on an all out track rat, drift car, or full out race car build you want your alignment to stay constant. Get it? Flex = the enemy. That makes Delrin the ultimate bushing for all out race vehicles. It does add alot of noise into the car. Thats where poly bushings shine. They offer performance similar to delrin without the noise!
A NOTE WHEN INSTALLING RAISED SUBFRAME BUSHINGS:
When installing Garagistic raised subframe bushings the differential mounting must also be taken into consideration. Since we are raising the subframe up within the chassis this also affects the differential position. There are two options for differential mounting with raised subframe bushings. The first is to simply run an offset differential bushing. This will allow the differential to be mounted to the subframe as factory and still allow the hole in the differential bushing to line up with the factory bracket. The second option is to install extended studs and spacers. This will effectively space the differential back down 12mm from the raised subframe. This will allow the use of a standard centered differential bushing as it keeps the differential in factory alignment with both the bracket and the driveshaft. We have used both methods with success on street and track applications.
Price is for a pair (2 units). Enough to do 1 car.