Complete BMW Rear Subframe Camber and Toe Correction Kit (e30, e28, e34, z3, e21)
Did you know we price match?
BMW Rear Subframe Complete Camber and Toe Correction brackets
The stock e30, e21, e28, e32 and e34 rear subframes does not allow you to align the rear wheels. Alignment is a critical point in spec e30 as well as any track, autocross, or spiritedly driven car. Adjusting your camber and toe is also a must when lowering your car. It's a night and day difference. When an e30, for example, is lowered, the car has a lot of negative camber (up to 6 degrees!). Although this is wanted by some, it can be excessive. These brackets are welded to the rear sub frame on the rear control arm mounting points. You slot the original hole and have these professionally welded in place. Then using either the Garagistic eccentrics or the OEM eccentric BMW hardware the rear of your BMW can be properly aligned! We also offer sub frames with this welding service completed and freshly powder coated for most BMW chassis, please see our other listings.
Do not be fooled by inferior kits consisting of bent sheet metal tabs that are flimsy and inferior. The fitment is poor on the eccentric bolt which increases the likelihood your car will go out of alignment over time or if driven aggressively. We have had customers get their cars out of alignment in a SINGLE track event with those kits!
Can be used for BMW e21, e28, e30, e32, e34, e36 318ti, and Z3. These are spec e30 legal! Professional installation recommended. WELDING REQUIRED! More details.
Whats included and which kit do I need?
Each "kit" includes 8 brackets. This is enough to do BOTH camber AND toe adjustment (This includes 8 weld on brackets and 4 OPTIONAL bolt assemblies with eccentrics, you will require eccentric hardware for proper adjustment) . The sub frame has 4 mounting points for the the rear trailing arm, 2 per side. The camber is adjusted using the inner mounts (closest to diff), and toe is adjusted with the outer mounts (closest to the wheels). The camber brackets (inner tabs) should be welded with the slots going up and down. The toe bracket (outer tabs) slots should be horizontal (front to back).
HARDWARE INFO: Please be sure to check if you want the genuine BMW OEM Hardware( Inlcudes Eccentric Bolts, Eccentric Washers and Bolts) or if you would like the Garagistic eccentrics shown below. If you get your own OEM Hardware the bmw part numbers:
33321095102 - Eccentric Bolt
33306786186 - Eccentric Flat Washer
33326760668 - Self-Locking Collar Nut
WE ALSO OFFER FULLY REINFORCED, ADJUSTABLE, AND FRESHLY RE-COATED SUBFRAMES ON A CORE EXCHANGE PROGRAM FOUND HERE
Garagistic Eccentric hardware:
For the core exchange program:
We also offer a core exchange program for specific bimmers. For this you will get a powder coated pre-welded adjustable sub frame that has both camber and toe adjustment with eccentric hardware. This will also include reinforced differential mounting points. In the future we will also be offering poly bushings as an option in this core exchange program. Send us back your STRAIGHT core and we will refund you the core charge. If you are interested in this service please see our complete adjustable sub frame listings! Check them out HERE.